Skip to content

Beginner guide · 12 min

Mina-kari: painted enamel on copper

Editorial team · updated 2026-09-29

Enamelled gold headdress ornament, Iran, 19th century
Related craft illustration; not a demonstration of this guide’s process or evidence of a named place.Enamelled gold headdress ornament, Iran, 19th century

a historical enamel example, not a modern Isfahan vessel; accessed 2026-09-30 · The Metropolitan Museum of Art · CC0 (Met Open Access) · Photo source ↗

At a glance
Type
Beginner guide
Reading
12 min
Chapters
10
Photos
1

Isfahan's glossy painted enamel on copper and silver.

Process

A metal base is coated with white enamel, fired, painted with fine designs and fired again several times.

Designs

Floral scrolls, birds and small figures in blue, turquoise and gold tones.

Check

Hand-painted work shows brush variation; decal transfers look printed under magnification.

Process

  • A copper (sometimes silver or gold) base is shaped and cleaned
  • A white enamel ground is applied and fired
  • Artists paint the design in metal-oxide colours
  • The piece is fired again, often several times, to fuse the colours

Quality and authenticity

Fine minakari has crisp, detailed painting and an even glossy surface. Cheap imitations may be printed transfers or paint without firing; these scratch easily and look flat. Isfahan is the main centre. Ask whether the base is copper or a cheaper metal.

Care

Wipe with a soft dry cloth. Enamel chips if dropped, and it is not suited to heavy daily use or dishwashers.

A note on this guide

This is a general introduction written by the CraftPersia editorial team. It has not yet been reviewed by a specialist. Confirm details with makers, conservators or museums, and treat any dates as approximate.

Craft
Vitreous enamel on copper (and finer metals), centred on Isfahan
Palette
Blue and turquoise grounds with painted florals and birds

How minakari is made

The copper body is shaped, cleaned and coated with a white ground enamel, which is fired. The painter then builds the design in layers — outlines, colours, fine detail — firing between stages. Each firing risks the whole piece, which is why master work is expensive.

Judging quality

Look for a smooth, even white ground with no bare copper, fine steady brushwork with shading within petals and feathers, and neat rims. Bubbles, pits and thick clumsy outlines mark souvenir-grade work. Signed pieces by recognised painters are the top tier.

  • Even ground, no bubbles
  • Shading inside motifs
  • Signature common on finer work

Care

Enamel is glass fused to metal: it does not tarnish but chips on impact. Clean with a soft damp cloth only, and avoid dishwashers and sudden temperature changes.

Quality tiers
TierSigns
SouvenirSimple motifs, thick lines, pits
Good workshopEven ground, detailed florals, neat rim
MasterFine shading, signed, often combined with filigree

References and further reading

  1. [1] Encyclopaedia Iranica — 'Enamel' ↗

These sources provide context, not authentication or provenance for an individual object. Editorial interpretations remain under review.